cE9s4PsOgeBQIORwjd5!~~60_1-634818020230156250.jpg)
BO)Lupuc4g~~60_35-634706297915000000.jpg)
LupbT6!~~60_35-634706298769375000.jpg)
C5j!~~60_35-634655044863125000.jpg)
C5j!~~60_35-634659603510781250.jpg)
C5j!~~60_35-634651704046230469.jpg)
This project has evolved some , the basic rundown is I'm modding two Omnibots , one a regular the other a larger 2000 model. I will have two ezb kits , rad base idea was thrown out because of so much noise but could go back on the table if the omnibot drivetrain is too weak to pull it.
By jstarne1
— Last update
Discover more robots
Oldbotbuilder's Baxter With Ax-12 And Iotiny
Baxter JD clone using EZ-B4/ioTiny and AX-12 servos - performs JD actions; includes power, servo mapping, USB2DYNAMIXEL...
Bumsteadsean's Synthiam Spray Steam Mop
Convert a Shark Steam Spray Mop into an EZ-Robot Steam Spray Mop-DIY robotics upgrade inspired by Team DJ
Rich's Jarvis Add-On #1
Automated direction-aware staircase LED lighting using Synthiam ARC, EZ-B and IR sensors with EZ-Script for runway-style...
Yes, But be careful. That stuff gets all over Everything. It comes in a tube and a spray can.
I will get the kind in the tube but first I will dynamat the inside of the case while it is still clean and grease free.
yes i have both works very well ,same use in servo's on pla stic gears spray can is better,because of the very small tube and can get in to small places that the lube tube cant
this one better then the lube (blaster powerfull white lithium grease)
white lithium grease in a can also ace hardware and homedepot might carry it,i think i bought it there
lube type does have very much in it
Ok tonight I will lubricate the gears. I need to test the base moving with weight on it.
I have a few things left to do so I can finally paint him!
1sand top of torso 2sand up vacuum and mid torso 3 mold in smooth the speaker grills 4.clean Tv mount 5.drill mounting holes for shoulder holes 6.cut vacuum door off 7.fill elbow opening.GA 8.install video card cradle 9.epoxy /fiberglass in steel axles to stiffin the frame 10.,create mount for DVD drive to be strapped to.
Not much left kids! Then he gets painted!
i see a lot of work,but do see its getting close to paint
I am over half way done with the rear ext. I molded the top and bottom. Tomorrow will be the sides.
Those shoulders look wicked! And the rest - hardly resembles the donor bot at all. Fantastic work Josh.