Hey guys...this Adafruit 16-channel PWM/Servo Shield integrates seamlessly to ARC now...
So if you are having one sitting on the shelf somewhere, give it a try and use some ARC functionality to drive your servos!!
By Mickey666Maus
— Last update
Discover more robots
Fisha's Wall-E Wall-E From Poland - Tribute To My Newborn...
DIY Wall-E robot with 12-14 servos, camera, ultrasonic sensor, MP3 trigger, amplifier, laser diode, VU meter mouth and...
Fxrtst's Will Huff's Lost In Space B9 Robot Build
Create silicone rubber parts for a Lost in Space B9 replica and use Synthiam products to build an amazing robot.
Fxrtst's Untitled Hoverboard Project
Build a robot base with cheap hoverboard 3-phase motors and Flipsky FSESC VESC - programmable ESCs, servo connector,...
Yup...I was kinda in a hurry!! On my PC all works just fine!!
Sorry to ask again, but I run into this problem when trying to connect the ARaspberry Pi to an Arduino Uno with ARC... I am trying to connect on this port /dev/ttyACM0 and with this Baudrate 57600
3/5/2019 11:46:00 PM - Attempting connection on /dev/ttyACM0 3/5/2019 11:46:00 PM - Connection Failed: System.NotImplementedException: The method or operation is not implemented. at System.IO.Ports.SerialPort.set_DiscardNull (System.Boolean value) [0x00000] in <bd46d4d4f7964dfa9beea098499ab597>:0 at (wrapper remoting-invoke-with-check) System.IO.Ports.SerialPort:set_DiscardNull (bool) at EZ_B.EZB.Connect (System.String hostname, System.Int32 baudRate) [0x001e1] in <d1fda7531a8e420f99237291dee29592>:0 3/5/2019 11:46:00 PM - Disconnected
Still a newbie...
Is it possible to connect it to the ez-b controller? Or do i need to use a arduino? Because i can't see it in the "add control" list...
You need an Arduino, you basically turn an Arduino into an EZ-B!!
Mickey’s correct - it’s an arduino shield. So the fridge is only connects to a arduino. The form factor requires an arduino