Hitachi-LG LDS Lidar
— Hitachi-LG LDS 360-degree LiDAR driver streaming scans into ARC NMS for obstacle detection, SLAM use, Arduino hookup, config options and variables.
Try it →
Since my robot is running on a Raspberry Pi, which is now supported by ARC, I decided to evolve my current project K[8] into a new one called ZOE... First steps will creating a new servo setup which supports Dynamixel Servos, and a new Conceptual design!!
Other projects from the same builder.
Robots the community built with Synthiam ARC. Get ideas for your next build.
Hey, if you want to connect the body to a tripod...this is the tripod I am using! You can of course also use other hardware, just for your info!!
https://www.amazon.de/gp/product/B07M8YTS72/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
hey mickey
i dont mind if the shipping takes some time.what do you think off the link in post#165 ? thank you very much for offering to help.i will need it.
And make sure you will also order this product together with the servos...you can get it from Aliexpress or Amazon!! It is really important to drive the servos!!!!!!!
https://www.amazon.de/LewanSoul-BusLinker-Debug-Board-LX-16A/dp/B073WRLJB2
It is much cheaper from China of course
https://www.aliexpress.com/i/4000786628654.html?spm=2114.12057483.0.0.4b346b4abT2pWY
I would actually recommend to buy a bunch of servos plus the board...its the best price you can get!
https://www.aliexpress.com/i/32966631680.html?spm=2114.12057483.0.0.bf486abeBJfpTD
cool the tri pod has same name zoe.i know there is a car with brand renauld zoe.
If you buy the bundle you will get five servos plus the two boards for less than 100$...
so i need 3 kits then.
You could get three kits if you wanted to...but I guess 1 kit and the rest of those servos just as servos would be fine, because you only need one board! But its up to you!! I got a whole bunch of those servos!
i send them a mail and ask for 1 set and 10 extra servo's. for the eyes i need only this part x2 or set, correct? zoe eyes