Since my robot is running on a Raspberry Pi, which is now supported by ARC, I decided to evolve my current project K[8] into a new one called ZOE... First steps will creating a new servo setup which supports Dynamixel Servos, and a new Conceptual design!!
By Mickey666Maus
— Last update
Discover more robots
DJ's Tamiya Bulldozer Robot
Convert Tamiya Bulldozer to use modified servos for precise speed control and greater strength, driven and controlled...
Spooky67's Synthiam : Mars First Contact
Centaurus 2 Mars Rover converts EZ-Robot JD with 3D-printed parts into a drone-launching rover with cameras, rock...
JT's Jts Robie Sr.
Restoring a Robie SR for EZ-B-ification: raising height ~6 in, adding a turning/tilting neck, new paint, learning...
is that the new part for in the head? i got the raspberry pi zero ordered. how much needs the charger send out,howmany volts?
5V you can also use the charger from you phone!
On the left picture you see the torso with the new part and on the right you can see the new part... This ist just for your information, so you can see how you will have to build the base!
The new part will hold some electronic components, like speaker neopixel an a Raspberry Pi3 or 4... But you don need this, you can also use your Laptop, or some people like the Latte Panda!
anyone around to try my robot on exosphere?
EzAng
hi mickey
witsh board do i need? red or blue?
thanks MRED is one you want
hi ptp
thanks red one will be.
ptp/mickey
does zoe use a camera? if yes link pls .i have finally ordered averything
.
if anyone is interested building zoe.here a link for the servo's.
servo's lx zoe
Hey Nomad, ZOE is using the Raspberry Pi camera...
https://www.amazon.com/Raspberry-Pi-Camera-Module-Megapixel/dp/B01ER2SKFS