cE9s4PsOgeBQIORwjd5!~~60_1-634818020230156250.jpg)
BO)Lupuc4g~~60_35-634706297915000000.jpg)
LupbT6!~~60_35-634706298769375000.jpg)
C5j!~~60_35-634655044863125000.jpg)
C5j!~~60_35-634659603510781250.jpg)
C5j!~~60_35-634651704046230469.jpg)
This project has evolved some , the basic rundown is I'm modding two Omnibots , one a regular the other a larger 2000 model. I will have two ezb kits , rad base idea was thrown out because of so much noise but could go back on the table if the omnibot drivetrain is too weak to pull it.
By jstarne1
— Last update
Discover more robots
Tombrookyo!'S Another Wall-E But With A Few Different Bits
Wall-E style robot build with servo-driven expressive eyes, hinge neck using a pushrod and stock pivot, ezB on back, I2C...
Robmcc's Brewster The Beer Buddy
Beer Buddy robot prototype opens fridge with updated code and LED light strips; demo video coming.
DJ's Trs-80 Model 100 Controlled Wall-E
Control an EZ-Robot Wall-e from a hacked 1983 TRS-80 via TTL Bluetooth; load BASIC programs over Bluetooth; EZ-SDK...
Anyone have a win 7 key and.maybe a copy of it?
wont do any good without the cd
That's what I meant by a copy of it , or a copy on a usb.thumb drive
no what i meed you need the windows 7 cd to go with the key, the key matches the cd
Ok update , I started cutting the track groove in the center of a wheel , first one was difficult but I bet.I can.do the other three faster. First I had to make a template so that when I mark each wheel.they are the same. Then cut dead center all.the way around. Lastly I must bevel.the edge with my dremel them hit it with sandpaper to get any buggers off.
It seems to turn smooth but I want to make the other three a little tighter to reduce and play.
I see your room mate cleaned the robot destroying debris off the stove! To bad you dont live closer , you could come over and whip those wheels out on something I have here. I still feel really bad about the robot body and all the work you had put into it. JW
Yea I didn't have the heart to work on it all weekend , I do have a replacement body already but when you work for a couple days to get it all just right. I picked up a sock backup and robbed the brain over the weekend.
what you need is a milling machine,if you have a xy table and a drill press you can make like a milling machine easy,it would make very even grooves,othr way is easy is to have the wheel mounted to a drill and have the dremel stationary and have the height adjustable,they do have a drill press for dremel tool,i use mine alot,most bought every attachment i can get for my dremel tool ,xpr4000 model lastest one but still you are getting there,good to see you have close to finish
my roomba project has just a few more days and it will bbe done,almost 4 feet tall with many sensor added
i see you like using the blue painters tape too