Script Monitor
— Monitor and diagnose running ARC scripts: view active script labels, statuses, and stop long-running or background scripts easily.
Try it →
This project has evolved some , the basic rundown is I'm modding two Omnibots , one a regular the other a larger 2000 model. I will have two ezb kits , rad base idea was thrown out because of so much noise but could go back on the table if the omnibot drivetrain is too weak to pull it.
Other projects from the same builder.
Robots the community built with Synthiam ARC. Get ideas for your next build.
-636504920452491494.jpg)
JOSH in a few days will have a post up on my omnibot 2000 design,i was looking at first my tracks and found a very simple track system bad news will need to remove the tracks from one of my robots stress stress but i can still replace it latter
it will handle a load of 60 lbs or more at 100 rpm,second does have a feedback pot for calculate speed and travel distance,very easy add on
about monday will post photos ,details and parts list,making a few changes and removing the main wheels for tracks,also will take larger wheels without any changes
just wait for the surprise
Yea tracks I will have eventually , lynxmotion brand but since the wheels I have will work.till he us operational that's a change worth waiting for.
while back in your omnibot post you had tracks made ,what happen to it
The treads were made of rubber and when my bot made turns the rubber tracks derailed. Because of carpet being in my house in combination with the robots weight I must switch to hard rubber or plastic tracks and use sprockets. I found lynxmotion had excellent premade tracks as well as another company.
yes i suggested the lynxmotion tracks awhile back as idea,instead of you rubber tracks,they easy to mount and add on
Anyways , I filled the arms screw hole and sanded them. I'm waiting for it to dry and harden.
So once this dries then I will lay a couple of layers of fiberglass.
Ok I've sanded the inside of the arm cases and rinsed away the debris. Once the water is dried off of it the rest of the inner arm will have 2 layers of fiberglass epoxied in. I will.update this post with that step by step
Ok so I fiberglassed both inner arms , next is fiberglassing the inside of the forearms.