Feetech Serial Bus Servo
— Control Feetech SC serial bus smart servos via EZB UART or PC COM port with ARC virtual ports, speed, position, release, and acceleration.
Try it →
This project has evolved some , the basic rundown is I'm modding two Omnibots , one a regular the other a larger 2000 model. I will have two ezb kits , rad base idea was thrown out because of so much noise but could go back on the table if the omnibot drivetrain is too weak to pull it.
Other projects from the same builder.
Robots the community built with Synthiam ARC. Get ideas for your next build.
i have used fiberglass alot too,its great stuff,heavy ,but hold great, by biggest project with fiberglasss was a small boat i made (1 man ) its pretty easy to form and make,only problem i see it gets very heavy
@robotmaker I have a complete & working RAD 2.0 I'm consider letting go of. None of the plastic has yellowed as far as I can tell. The only things I didn't get with it are the nerf darts & the remote's battery cover. You can email at nlkdavid AT pinnacle175 dot com
Hey Josh, maybe you could use carbon fiber instead of fiberglass. I see it pretty cheap on ebay, not much more than glass. Just a thought.
Links?
carbon fiber very light ,used for making quadcopters
Is it easy to work with? I have never used it before.
It's the same as fiberglass the matt with carbon fiber , apply resin and sponge off excess, the matr just weights 1/3 as much so it drops weight a little.
got it.... I have worked with fiber glass before the resin even more. (Made a paper hat for burning man) Never used the carbon fiber.
Is it as strong?