-635143705157812500.jpg)
update 9-9-2013 added pics of the sparkfun mp3 trigger and installation.
check it out! I have added body tilt, forward back, left and right.
By hoolagen1
— Last update
Discover more robots
Hstud's Hunters1st Robot Sam
DIY robot S.A.M. built by 8-year-old Hunter using EZ-Robot v3 and simple parts, dollar-store body, PVC arms, LEDs and...
DJ's Elastic Band Shooter
Elastic band shooter for hexapod in Synthiam ARC: servo uses a hexapod leg to raise/lower the body for vertical aiming....
Cardboardhacker's 1/2 R2d2 Scratch Build
Build a compact R2-D2 using a cement pillar tube shell, ribbed papier-mache dome, and wooden inner frame to mount legs...
Sup troy,
I used your set up for the body tilt. Thanks again for all the pics and advise on your thread! The only problem was the body is much smaller than the u command wall e, so I placed all 4 servos under the body instead of inside.
I will. Set up the rest of the servos and show off all the point of movement.
3 motions in the head (4 servos) 1 neck in and out motion (1 servo) 2 motions in each arm (2 servos per arm) Body tilt and wheels.(4 servos) Plus a smoke sensor / 2 ir sensors / mp3 sounds and LEDs
Trying to break into the top 5 of tricked out wall-e's on the forum!
this is the head and neck motion
Great job. Im glad you were able to improve on it. We all are learning from each other. You have a lot of movement in the head and body. I love it. Again great job. All you need are some dance scripts.
I concur with Troy! ......very cool Wall-E which I will be following!
adding sparkfun mp3 trigger i cut some slots on the top of the body for the main switch and access to the micro sd card.
first some pics of the wall e
now some pics of the slots that i cut
now some pics of the mp3 trigger board in the body
and finally some pics of the micro sd card and main button "popping" out of the slots i cut.
Smoke sensor and "all movement" video coming up.
I love robots!