Assigning Servo On The Ez-b

Question

Sorry but I'm not good at instruction. So how do you assign the servo on the pins of the EZ-B so that the software knows which ports is which. I'm a little bit confused of how it works though.

DJ Sures · Answer

This will help: https://synthiam.com/Tutorials/Lesson/49?courseId=4 For more information, the LEARN section can be accessed by pressing the LEARN button from the top of the website. Hope that helps

Dunning-Kruger · Answer

@deuel18 ... After you have a look at what DJ posted you can try it out yourself... It is pretty straight forward, you don't have to do anything special... Below is a basic script command to move a servo to 90 on port D0 then move it to position 180 1 second later...
 Servo(D0,90) #move the servo on D0 to position 90 sleep(1000) #pause for 1 second Servo(D0,180) #move the servo on D0 to position 180 #etc... pretty simple...

Nomad 6R · Answer

the ezbv4 has colored pins.see pic.  keep asking your questions

deuel18 · Answer

Thanks guys

deuel18

Assigning Servo On The Ez-B

Upgrade to ARC Pro