HI all,
I am a newbie to the EZ robot family and just fining my feet, I have a revolution on order and it has just progressed to "processing order". Getting excited now.
As i can't contain myself i thought i would share some photos of my build so far and update you all periodically on my progress.
My Walker is a Hexapod with a total of 18 servos in charge of the walking 3 on each leg, Sorry for stating the obvious there. All parts are hand cut (how i would love a laser cutter at times).
If i have done this correct then you should be able to see a photo of a Calf/Foot.
Only 5 more to do 
thanks for taking the time to read this, i will keep you all updated and hopefully not bore you death.
By mgodsell1973
— Last update
Discover more robots
Ezang's 6/9/2021 New Borg Robot - Combination Of My Robots
Combine Borg and crane robots with EZ-B4 controller, servos and strobe light; programmed with Synthiam ARC for voice...
Ezang's RGB Arduino, Python Code With ARC
Control Arduino RGB LEDs via Synthiam ARC serial monitor with Python code; ask a color and watch R G B light up.
Luis's Using The Sure Dc Ss503v100 With Ezb4 From Ez-Robots
Connect Sure DC SS503V100 compass to EZ-Robots EZB4 via UART: RX/TX wiring, set OPT high to 3.3V, 4ft wire tested,...
looking cool.
:)
j
Thanks
:)
:)