As I said before, I've been working on a 24 DOF humanoid robot (what i believe to be the most DOF in a EZ-Robot humanoid) and I finally have a good camera to show him off! As you can see, his two wrist microservos are currently off. (I'm waiting for my threadlocker to glue/bolt these on) and as is his head (it hasn't come yet, same as the EZ-B v4)
All I need now is to extend the leg cables and get a bigger battery, glue the head and hands/wrists on, and he's ready!
Feel free to comment, if you have any suggestions, tell me!
(P.S, this IS a custom robot. This is not a standard Robotis robot.)
also, the pictures were taken later at night, so please excuse the darkness.
CURRENT OVERALL TOTAL (USD) : 1200 (about)
By Sudo the Banned
— Last update
Discover more robots
Itsmeintorre's 3D Printed Adventurebot
3D-printed AdventureBot built from 'bare' STL files with Ender3, EZBv4, 360deg servos, custom inner-tube treads; PLA...
Buratino's Luxor Cab As Seen In Back To The Future 2 -...
Luxor Cab BTTF2 replica: 3D-printed, CAD-refined Citroën Pallas model with servo-driven landing gear, integrated LEDs...
Bhouston's Inmoov Doing Math
InMoov robot performs math using EZ-B v4 and Synthiam ARC scripting, highlighting community-built scripts and advanced...
bobbo whits one do you have?
Nonam@I have the Bioloid Premium Kit with the CM-530 controller and Zigbee module. I built the Bioloid type A.
i got also type A but whit chest comprehencive and cm-510.i use the 510 cause you can refirmwire servo's and controller.
Cool my Bioloid will be a EZ-B robot too! I need to buy a few more EZ-Bs.
same here.
Man, it's been a while since I posted in here! I'd just like to share what I did with the robot: -rewired the body to all be connected -changed the shoulder joints -added a battery to power the cooling fan/micro servos -fixed the way the arms work a bit
this should make it function a bit better when I finally get my EZB v4
i'll post the pictures as soon as my camera is charged
Cool!
sorry for the lack of pictures, i've actually started work on a body shell and i'll post results in a little bit