Hello EZ-B,
i have a V3 controller for my project, and i and i can not connect to the port from today. May i ask if it changhe something for the EZ-B VE controller?
i have read the post that it is no longer supported by EZ -B. But all this days i had no problem with the controller v3!
Friendly Sakis
The EZB3 is discontinued but ARC still works with it... see here EZB3 Support
Hi Richard ...,
oh!, for my project!.
May i ask you if you know if i can use a USB to TTL UART CH340 - Serial Converter? i want to connect my v4 ..Now .., with a usb and not with wi fi.
https://www.aliexpress.com/item/CH340G-5V-USB-to-TTL-UART-Serial-Converter/32524218818.html?spm=2114.01010208.3.37.JmcP9Q&ws_ab_test=searchweb0_0,searchweb201602_1_10065_10068_10136_10137_10138_10060_10062_10141_10056_10055_10054_128_10059_10099_10103_10102_10096_10148_10147_10052_10053_10050_10107_10142_10051_10143_10084_10083_10080_10082_10081_10110_10111_10112_10113_10114_10037_10032_10078_10079_10077_10073_10070_10123_10124-10050,searchweb201603_6,afswitch_1,ppcSwitch_5&btsid=454d7b93-f4f3-4f9a-9a37-0ec3e086eeb5&algo_expid=83b63798-10f8-49ae-917e-9a08e3668d5e-7&algo_pvid=83b63798-10f8-49ae-917e-9a08e3668d5e
Already done for you, see here... USB connectivity for EZB4 Whatever you buy the USB adapter must be supported in Windows 10
Mpravo Richard!, thanks a lot .
Hello again....,
may i ask if i can use the serial Port for USB Connectivity? or just the Camera Port?
You need to use the camera port unfortunately...
The manual tutorial that was given to you in an earlier response contains the instructions, and the only instructions.
If your robot is connected via serial, there is no need for the ezrobot camera. This is because your computer is obviously close enough to use a USB camera.
ok, thanks alot for the clarification DJ Sures and Richard.