-635971125254815084.png)
-635971009768280111.jpg)
-636393423097260688.jpg)
-636337988865509663.jpg)
Hello all, I am getting back in the saddle making robots now that I am moved into my new home and settled into my new job as a technician maintaining the Fiber Optics network in Chattanooga TN.
IM BACK !
By jstarne1
— Last update
Discover more robots
Ezang's MEASURING DISTANCE TO OBSTACLE USING THE HC-SR04
Measure distance in inches with HC-SR04 on Arduino using Synthiam ARC serial monitor; converts pulse microseconds to...
Lars1989's Omnibot 2020 - The Next Generation
Revive Omnibot 2000 with an ez-robot kit and L298N motor controller; add small servos for arms and test a 6V 5Ah gel...
JT's Jts Robie Sr.
Restoring a Robie SR for EZ-B-ification: raising height ~6 in, adding a turning/tilting neck, new paint, learning...
The left motor is mounted to the steel plate. I reassembled the casing to mate the motor to the gearbox. I may drill a couple 1 inch holes to act as additional vents to cool the motor.
I made a hole on the ends of the casing to feed the power wires through.
Josh, I am not laughing, that is easy to do. Looking forward to your updates on your project. Steve S
A quick test for shows I need to do some trimming of the case or the plastic on the frame to line up with the bracket mounting holes. I will do this and go from there.
Oh and thanks Steve , I appreciate the support.
Ok so I dug out the plastic sprockets and chain, I really intended on using the metal chain but the location eludes me. So I will use the plastic chain as a place setter till I find the stronger metal counterpart.
The chain came in a baggy of individual links so I had the pleasure of painstakingly twisting and pushing these links till they snapped together. Poor fingertips
I know have 6 feet of this stuff I believe.
Ok yet another hurdle , once the motors are in I can see the drills output shaft lacks about an inch and a half longer to align with a drive sprocket. Maybe I could weld on an extension?
Good news , servo city machines aluminum hub spacers I can use to extend the shaft long enough to align with the wheel hub sprocket.
So now I wait will I get the parts to do this. In the mean time I can start wiring and finding ways to mount the motor controller and the EZ-B as well.
Does anyone know which gets better wifi range , The tiny or the v4 with original wifi shield?