This is OKIO J5 style robot made from an upright vaccum cleaner. The head i made from a dremel accessory toolkit and led eyes ,2 servos for eye covers. The neck is supported via 2 Rc oil filled shocks. He is 44 inches in height. Weight is 28 lbs. Has 9 inch Windows 10 tablet. The tracks are not functional. The robot has motorized wheels and 2 from casters. I also installed an HD usb camera between the eyes. Used 19 v lithium battery for drive motors and 7.4 v lithium for electronics. The arms have 2 shoulder servos and the hands are spring loaded fingers from a Robosapien robot.
By rb550f
— Last update
Discover more robots
Mereyes's Mereyes WALL-E
WallE replica using EZB v3 controller: wheel/arm/head servos, BlinkM eye, 2.4GHz camera, SparkFun MP3 trigger, 6V...
Markthebotbldr's Drone Tracking Fun
DJI P4 active tracking follows a hacked Friendly Robotics Lawnbot using Sabertooth motor controller, switchable EZ-BV3...
Robotz012248's My Desktop Trio Of Robots
Interactive desktop robots built from a Harbor Freight parts box using EZ-B, micro servos, pan/tilt and LEDs, programmed...
I live in central Arkansas. The name of robot is OKIO. Yes I gutted vac except for power switch. The tracks float above ground. I will post more detail pictures when I return from Bend,Oregon vacation. The neck was created by turning the upper handle 180 degrees.The cannister can be removed with EZB mounted in place. I used a cordless drill battery that slides in the back . The tablet is detachable. Thank you for positive feedback.
Yeah, OKIO is pretty awesome looking! Nice work @rb550f