Just received my servo and the colors appear orange, red, and brown. Needed to know which color is pos, neg ,and data. Thanks.
sgtserg
USA
Asked
— Edited
Servo Speed
— Adjust servo/PWM speed (0-20) between two positions to quickly experiment and tune motion; select board/port; settings aren't saved.
Try it →
Sorr they are not the standard white red and black. Use orange -signal red-pos. Brown-neg
The darkest colour is ground, and is on the pin closest to the chip on the EZB (closest to the middle of the board).
All of my servos use orange/red/brown colours, I thought that was standard...
Thank you very much.