Discover more robots
Ww321q's Testbot
Learning the software; experimenting now with plans to add camera and arm.
DJ's The Real Wall-E
Wall-E using EZ-B and Synthiam ARC tracks faces, color and motion with camera, vertical head servo, voice control and...
DJ's At Home With Jd
Tweak JD's EZ-Robot motions for smoother, less clunky movement-fun first-time session that shows why EZ-Robot is so...
Thank you @Holy That gives me a really good guide (especially because I am in Canada :-) Your build is very clean so appreciate you giving me the break down. Looks like labour is your biggest expense and your attention to detail shows. Thanks for sharing.
@Nink, Sure no problem. Let me know if you need anything else. I'm here!
@holy1, I see you’ve add something between the back pistons on the stomach. I’m wondering what you did there.
@Bob, It's a tilt re-stricter. I put it on when not using the tilt forward function so it stays in one place. I use an elastic to hold it in place.
Here is the file and stl.
The .step file won't upload.
Thanks, I’ll have a look at that. Does your stomach move quite easily or does it need a push move it? I have to give mine a good push to move it when the power is off.
No, it needs a push to move but if the arms are straight out holding something and the base servos are released it will drift forward. The tilt restrictor will prevent that but will still allow leaning backward a few degrees.
T-One does Christmas Vacation rant.
Bad Robot