-636459989693042832.jpg)
-636459989943960739.jpg)
-636459990485479714.jpg)
-636459980560649389.jpg)
-636459975718038038.jpg)
-636459969210457653.jpg)
-636459967995726605.jpg)
-636459970865108143.jpg)
-636465120384538626.jpg)
-636465113490053830.jpg)
-636475595612490698.jpg)
Here is the current look of this project, Super cool update, magpi magazine wants to feature this build with steps how it was done , !
By jstarne1
— Last update
Discover more robots
Justinratliff's Data Or Termidata
Centurion security robot inspired by Cylons, Terminator and Person of Interest, built with Synthiam ARC for...
Ezang's Motion Detector
Control AM312 mini PIR motion sensor with ARC serial monitor and Arduino - DC2.7-12V, 3-5m range, 100 angle, low...
Ezang's New Hand Progress, 3D Printing, Glyphs , Ultrasonic,...
Synthiam ARC controls multi-controller EZ-Robot with 2 Iotiny, 2 EZB4, HDD/996R servos, RGB eyes, camera and motor...
Tiny update , I picked up a 5 gallon bucket a leak proof spin on lid with O ring. So this should keep water out as long as I am careful to silicone around sensors.
As far as width it is going from 8.5 inches in diameter to 12 I believe.
The raspberry pi 3 board and EZb v4 have been arranged into a tower. At this time I will run the Robot by WiFi as it seems most devices work fine outside in my yard no problem. 4 rpi3 stacked and the EZBv4 is at the top of the electronics totem pole
I also took also took the time to mount the two knobby tires I picked up on amazon for 11 dollars. I will post pics of those once inflated and back on the chassis.
Mounted with a 10 inch tube inside st 22 psi of air at 32 degrees F.
Mounted , muahaha
Ok stacking the electronics didn’t work because it requires more vertical space. I don’t like how that would look so I separated the boards and cut a wood circle to mount the electronics to inside the water resistant compartment.
How could I manage to miss this epic threat?
@jstarne1
Are you running a Raspberry PI cluster on your bot ?
No ethernet hub ? or a Wireless router on your bot ?