Hi Guys,
When rummaging in the attic I found my old Omnibot with the remote and the original battery pack
The battery is dead but I popped in two double A's and the digital clock still works. I was too young to really understand what I had was more than just a toy (I was 5 when I got it).
Anyway, I want to work on a project with my daughter. She's 7 but she's taken a real liking to electronics after I got her a snap electronics kit. Can anyone suggest a good project and what basic hardware I should purchases (servos, sensors, etc.) to get started.
Thanks, Ali
By aliusa
— Last update
Discover more robots
Antron007's Mobi2 (I Like To Score Too)
Synthiam ARC Mobile Interface and Android app control a DIY Laser Pegs robot using modified servos, Xbox 360 controller...
Lars1989's Omnibot 2020 - The Next Generation
Revive Omnibot 2000 with an ez-robot kit and L298N motor controller; add small servos for arms and test a 6V 5Ah gel...
Fxrtst's Will Huff's Lost In Space B9 Robot Build
Create silicone rubber parts for a Lost in Space B9 replica and use Synthiam products to build an amazing robot.
It has begun!
I will start with the drivetrain. This is the H-Bridge I bought. Anyone have a tutorial for this one?
I'm back and working on the OmniBot hack.
I liked how B.O.B. bot has the lights that flash along face plate. It's a sequential blinking. Do you guys have any recommendations for lights, led, rgb or anything else so I can mimic it.
Thanks!
For the head rotation, I initially removed the tabs but the head did not rotate freely, it kept hitting the sides. So I shaved off the plastic using a belt sander. I also added foam to create friction.
Hey - that's exactly what i did. I used a dremel to cut the plastic around the head disc. I didn't cut it very smooth... yours looks better
You should use a standard servo for head rotation. Micro servo won't last very long. Trust this with my experience.
Thanks Dj!
rb550f, I already burned one out! :-)
I'm using the servos that came with the EZ-B Kit for the shoulder, elbow, and claw. The elbow and shoulder servos both make a lot of noise. Should I try replacing them or counter the weight some how?
Oh geez - i didn't notice it was a micro servo. I agree with @rb550f
The HDD servos are best to use for the arms and elbow. Are your servos HDD or HD from the kit? depends what version of the kit you have. Look at the servo label
@Dj, these are HD. What are the specs on the HDD?
The sticker is the same as the ones listed here (HDD): https://synthiam.com/Shop/AccessoriesDetails.aspx?productNumber=7