We poked around about doing this a year ago but where to start got us hung up! Due to the DRD Strange shape and size larger that the makerbot , 3d printing the whole shell as one piece was not possible. However drawing details and then applying them to a hand made oval body is totally doable! This is the start of the project , I wanted to get something together that could be shared with the rest of the community. Once details are glued on then you can use a DREMEL to dig out the cavities between details. This is what makes them POP!
By jstarne1
— Last update
Discover more robots
Lsradets's EZ-Inmoov Robot Head
EZ-InMoov robot head with Synthiam 3D-printed parts and EZ-Robot electronics, programmable via Synthiam ARC for...
Ezang's New Mr. Metal Robot 2020
Build Mr. Metal robot with Synthiam ARC using EZb4 controller, EZrobot 1300 camera, four EZ 360 HDD servos, Servo City...
Cardboardhacker's Penguin-Like Robot Project!
Penguin-themed robot design: rad base, white garbage-can body, torso top; considering alarm-clock head and seeking head...
Hi Jay, As always, A super project... I look forward to the next steps.
@Andy Roid , Thanks!
Now who all is interested in getting their very own DRD kit?!
Fiberglass and resin goes into the mold, I used canola cooking spray as a mold release. I will let it sit overnight and go from there.
Quick try on fiberglass and plaster , I will need to do a liquid rotary cast to get the plaster just right.
Brush method sucks for ceramics so instead I tried the 2 to 1 water to plaster ratio and turned the mold slowly to make a 1/8" coat each pass , I did three passes. It turns out much cleaner and minimizes waste this way.
These first two plaster copies of my DRD are on the way to EZ-Robot! I hope DJ and Jeremie finish them and enjoy my little contribution to the fandom of Farscape and science fiction.
cool pics