Ez-b V3

Question

Hello, anyone know the the min. and max. input voltages to power up the EZ-B v3? Thanks.

Dunning-Kruger · Answer

I believe it is 5V ~ 17V or so....

steve3624 · Answer

Thanks, any way to verify that? I don't want to see the magic smoke.

Steve1DH · Answer

@Richard R is correct.

Steve S · Answer

Richard R is right. Here is EZ Robot tutorial in which D.J. says up to 18 volts. Mine had better performance at 7.2 volts. Steve S Video Link

Rich · Answer

7.2v is recommended voltage 17v is maximum however may cause the regulators to get hot (spec sheet says 17v but DJ has said 18v personally I'd go with the lowest of the two to be safe) 5v is absolute minimum however may cause the EZ-B to become unstable

Dunning-Kruger · Answer

@Steve3623, those numbers are correct... you won't blow your board....

steve3624 · Answer

Thanks everyone I appreciate the help.

CardboardHacker · Answer

Close the thread with whoever helped you the most.(not to pester)

steve3624 · Answer

Thanks, Richard R,although the rest of these posters helped to verify his answer.

Dunning-Kruger · Answer

It's an awesome community here... we back each other up.... Hope you stick around...

steve3624

Ez-B V3

Upgrade to ARC Pro