Reproduction Tomy Omnibot Jr/omnibot/omnibot 2000 Robot Tire Sets For Sale

Question

For those who may not have read my Omni2k wheels thread, I am now offering reproduction tires for sale for the Omnibot Jr, Omnibot and Omnibot 2000 robots. Tires are sold in sets, available in a variety of colours and are available worldwide.

Please checkout my ebay listing for details.

Reproduction Tomy Omnibot Jr/Omnibot/Omnibot 2000 robot tire sets

winstn60 · Answer

Just wanted to say I got a set of nice blue Tires for my Omnibot from Matt.They are awesome very well made and an easy fit It has transformed by Robot and now Omni is smoothly rolling around the house Cheers Matt

bret.tallent · Answer

They look awesome too!

jstarne1 · Answer

Are these tires "hard" or softer rubber with good grip. If they have more grip I could be interested

mattbrailsford · Answer

Hey Josh, these are made of a 60 Shore polyurethane rubber so are a bit harder than the silicone you recommended, so should be a little more hard wearing (Car tires are around 65 shore from what I could understand). I went with 60 shore as it still has a little bit of flex to each tread on the tire so should give a nice grip, whilst being really quite strong with not too much give that they slip off (I do have some 70 shore if you want even stiffer ones for outdoor robots, but it tends to come out a bit smoother, so not as suitable for indoor use I would say).

mattbrailsford · Answer

Good news, I've managed to find a grey pigment that works and it's pretty darn close to the original if you ask me  The cog is made of rubber using the pigment, whilst the band at the bottom, is an original tire (turned inside out so I could verify the colour easier).

jstarne1 · Answer

Thats awesome..... so your making rubber gears now? Or is that a harder plastic to make back up parts ? I made some robie jr blue tracks a couple nights ago. I roll mine out flat to cast them.

mattbrailsford · Answer

Niice! I'm experimenting with a different blue as we speak. Whilst the ones I made for winstn60 are blue, they aren't as bright as I would like them (like yours). I'll put a picture up when they are done. The gear was just from a test mould I made casting the middle arm gear of the Omni2k to see if I could create some backups. I tried it with a solid casting resin, but it was just too brittle. So I used it to create the test casting in the grey as I wasn't sure if the pigment would work, so wanted to test it in a mould I wasn't too bothered about

mattbrailsford · Answer

Ok, here's the blue test  It's better, but I would still like it a bit lighter (it's kind of a royal blue). I think the problem I'm having is that the liquid rubber is naturally a browny / yellow colour, so I think this is darkening it up. I have some white I could mix in, but the goal is to find a pigment that works well on it's own so that I don't have to measure stuff and I can get a consistent colouring.

jstarne1 · Answer

Fyi best mix ive seen for home made gears is fiberreinforced plastic. You can get liquid acrylic and shaved fiber and mix them together.

mattbrailsford · Answer

Ahh, cool suggestion. I'll try that

won4all · Answer

Hey Matt, I was wondering if you still have any wheel treads for sale for Omni-Jr? I see the old ebay link expired. Thanks.

mattbrailsford · Answer

Hey, sorry, I had to take it down as was taking up too much of my time. I'm getting married in a couple of weeks, so will look at putting it back up when I have some more time free

winstn60 · Answer

Congratualtions Matt

won4all · Answer

Hello Matt, I hope that all is going well for you and your new wife. I am still having trouble locating a set of wheels for my Robie Jr. unit. I was wondering if you have picked up making replacements again? If so, I would greatly appreciate the opportunity to get ahold of a set. thanks!

MikeDC · Answer

Hi Matt, what did you use for your grey treads? I have the silicone molds done (left the idea of silicone for the treads since my first molds were destroyed by the silicone for the treads - silicone on silicone got just stuck together). I had the chance to get the exact same material you used for your treads - just waiting for it to arrive here and I will start out making black treads for Omni 2k and Omni Jr.! Cant wait! Any luck with the reproduction of the gears? Check out this site on gear production: https://lcamtuf.coredump.cx/omni2/ Mike

mattbrailsford · Answer

Hey @won4all. I'm currently making some tires for other folk as we speak and I have a spare set of Robbie Jr tires if you are still looking? @mike looks like you are making some good progress. I found the same when I tried silicone, but this polyurethen rubber works perfect. The only thing I'm still struggling with is finding the perfect blue. I really want one like Josh's tires, but everything I try either comes out too translucent or almost black. I've not really got anywhere with gear reproduction yet, things have slowed down quite a bit (My wife has started working with me so all the robots have been relegated from the office Matt

MovieMaker · Answer

Matt, those are beautiful!

won4all · Answer

Hey Matt, Thank you so much, I am absolutely still interested!

jstarne1 · Answer

I just use blue RTV Silicone to get the pretty blue in my previous pics.

mattbrailsford · Answer

If anyone is interested, I have a few sets made up for sale:  1 x Set of Grey Omnibot 2000 tires @ 30 per set 2 x Set of Grey Omnibot tires @ 20 per set 2 x Set of Blue Omnibot tires @ 20 per set 5 x Set of Grey Omnibot Jnr tires @ 10 per set Prices exclude postage. Drop me an email at me@mattbrailsford.com if you are interested. Proceeds will be going towards a new angle grinder Many thanks Matt

jstarne1 · Answer

I'm surprised there isn't a piggy bank set for a new 3d printer yet

mattbrailsford · Answer

Ha ha, where is the fun in having a machine make everything for you. I'd rather know how to make things myself. I'm hoping to make a life sized wall-e at some point, so need to get my welding / metal work skills up to par

jstarne1 · Answer

Is it too much to ask for it all?

mattbrailsford · Answer

Updated the list as a couple of sets have gone. The rest are still available if anyone wants a set

TKOMNI0205 · Answer

@mattbrailsford are you still producing the tires?

ryanm · Answer

Hello All, I need tire treads for my Omnibot 2000 as well. Seems this thread is old and not a lot of resources of places to get these. Plus I need new rubber pieces on the talons/claws on my Omnibot 2000. Any ideas out there? Thanks much!

Jeremie · Answer

Hi @ryanm

If you have access to a 3D printer (and designer) you could use flexible filament and reproduce the wheels and gripping surfaces. Otherwise common waterproofing (rubber) tape + glue could be another possible solution.

Nomad 6R · Answer

maybe you can use the treads of a roli for making tires or make tank treads.

Nomad 6R · Answer

i found this link. omnibot gripper

Nomad 6R · Answer

here's a link for parts omnibot. parts bidding

Nomad 6R · Answer

here 3d printed with rubbers for omnibot.bolt grippers. 3d printed rubbers

ryanm · Answer

Thank you for the input Jeremie & Nomad...I have been checking out eBay and I definitely will keep looking around for solutions. I think a parted out Omnibot will be my easier option.

mattbrailsford

Reproduction Tomy Omnibot Jr/Omnibot/Omnibot 2000 Robot Tire Sets For Sale

Upgrade to ARC Pro