Topic about 3d printing. How to start with 3d printing.
By Nomad 6R
— Last update
Discover more robots
Ezang's Mr. Conehead Dancing, Take 1 - I Will Try More...
Stabilize hard-to-balance Mr. ConeHead for dancing, preparing for Take 2.
Ezang's The Borg - Resistance Is Futile, You Will Be...
Borg picture and new video by EzAng, image uploaded May 17, 2021
Oldbotbuilder's Baxter With Ax-12 And Iotiny
Baxter JD clone using EZ-B4/ioTiny and AX-12 servos - performs JD actions; includes power, servo mapping, USB2DYNAMIXEL...
I haven't got it for this printer yet. It will be a little smaller. It has to allow access to the screws to level and adjust the heat bed. Once I put the glass on the bed and adjust the level I put the blue tape on the glass for pla. Or for abs I make a mix of scraps of abs and acetone. It ends up like cream. We need to talk about abs before you try it. Maybe by Skype.
klamps
i see people using klamps for mounting the glas on the bed.i will defenetly start with pla.if i have all the parts, we can do skype awesome thanks.
Send me a picture or web site of the printer when you can.
printer i bouth it on ebay,new in box never used.
It looks like the version 2.nice
Yes its a version 2.and good prize too .is yours connected thru usb cable or wifi?
Mine is a version 1. I use the SD card. I could also use the USB. On my other printers I also use the SD cards so it is the easiest way for me. I keep my other printers in a different room. The new I keep in my office so I can make sample parts quickly. I also plan on mostly using pla on this machine, and abs on the others.
so all your stl files go on a sd card if i understand you?