Ha ha ha. Yes - R2-D2.
I know, it's original.
Anyway, finally managed to start on my R2.
This is a small scale prototype - planning on building a full scale version but thought I'd start small.
Not much to report at the moment, but as I progress I'll post more.
I'm using the Hasbro interactive R2 as a base.
And that's it so far.
By robt1275
— Last update
Discover more robots
Lars1989's Omnibot 2020 - The Next Generation
Revive Omnibot 2000 with an ez-robot kit and L298N motor controller; add small servos for arms and test a 6V 5Ah gel...
Budel0's R.O.O.S.T.E.R.
R.O.O.S.T.E.R: 6-wheeled Wild Thumper with 5-DOF arm, netbook, EZ-B control, six motors, ESCs, ping sensor and planned...
Ezang's My Tightrope Robot Without The Squeak, Sorry For The...
Tight Rope robot without the squeak - enjoy a smooth, silent balance performance
I didn't use the rotation sensor... just used a motor controller to control the direction of the head motor left and right... In my case I used a Vex single motor controller and PWM commands in ARC... This allows me to control the left and right movement of the head... You can use an H-bridge or any other controller as well... Finding centre is crude but easy... I just swing the head farthest to one side then PMW the appropriate amount back in order to centre the head... Crude, but it works...