Sharp IR Collision icon Sharp IR Collision — Stops movement panels when a Sharp IR sensor on EZB ADC detects objects within a set range; displays ADC voltage, VU meter and 0-255 distance value. Try it →

Robot Building Community

Share robot projects, ask ARC programming questions and learn from other builders. Browse tutorials, Robot Skills, example programs and community discussions.

ARC Pro
Learn More
Upgrade to ARC Pro
Your robot can be more than a simple automated machine with the power of ARC Pro!
Power Up Your Scripts with AI
Describe what you want — get working robot code. The project-aware AI Script Assistant built into ARC.
Synthiam Credit
Log In
Earn synthiam credit to lower synthiam product costs
Earn Free Credit
Share your robots, answer questions, and help others — earn credit toward ARC Pro, AI credits, and robot swag.
Remote control robots or add telepresence capabilities with Exosphere

Drive Real Robots, Anywhere

Remotely operate robots around the world or add live telepresence to your own build — straight from your browser.

Discover Exosphere
LewanSoul Servo by LewanSoul
Featured
Lewansoul Servo

Control LewanSoul LX-16A servos via ARC (EZ-B v4/IoTiny): assign virtual ports, read positions, set speeds, and enable continuous rotation.

Community

Join the Synthiam Robotics Community

Connect with thousands of robot builders, educators, and engineers. Share projects, get answers, and learn to build smarter robots with ARC.

  • ✓ Showcase your robots & projects
  • ✓ Get help from experienced builders
  • ✓ Earn credit toward Synthiam products
Create Your Free Account Log In
question

Irbot Create Issues

Hi, i'm trying to get my Irobot Create working and my connection seems to be fine, it say connected buy when I try to make it go forward nothing happens, I've check my cord, it did actually work 1 time then I picked it up and I can't get it to work, any ideas. sojc_98
question

How To Pwer A Ez Camera From A Power Source

all you need is usb type a female breakout board and a 5 volt source,plus usb charging cable that comes with the camera here is a link to usb breakuot board for $6.95 ic shipping usb breakout board first link is usb 3.0 usb 2.0 breakout board this is the one i bought ,other dont know if will work on usb 2.0 type A USB MALE and its little cheaper at...
question

Arduino Infrared Module Kit As Table Top Edge Sensor?

in the video below i think the guy is using the arduino infrared module kit (link to ebay item below too) i wanted to see if anyone here know if we can use this kit as edge detection. so my wall-e doesn't fall of the table. in the video it shows that if even one sensor (either the transmitter or receiver ) go off the table the bot stops and...
question

Edge Detectors

I'm a newbie to the forum and just in the planning stage ( and gathering parts) for the OmniBot conversion. D.J. calls for a QR111D edge detectors. I can"t seem to find one online. Anyone know if there is an equivilent part (w/part number) available? Will any of the detectors from solorbotics work? Thanks in advance.
question
R2d2 Ideas

R2d2 Ideas

check out the video...its awesome...and this dude is using a crappy little r2d2. imagine that on our hasbro artoos that are much bigger......so awesome, im hacking mine up tonight. all the ligths...
question

Colin's R2D2

Hello everyone! Straight from the cave comes the R2D2 build! I'll be posting video/photos as I can. Being a student they might be few and far between but everything I do will be documented in video and posted eventually! Thank you Bret for posting the eBay link, I never would have found this guy otherwise!
question

How To Use Hc-Sr04 Sensor As A Ping Sensor

its fairly easy using a pnp transistor and 10k resistor on the trigger pin you use a 10 k to gnd and then emitter tied to trigger pin ,collector gets v+ and base gets another 10 k tied to digital pin and the same digital pin tie the echo pin ,need to first pull digital pin high for more then 10 us and then low to read the echo bounce
question

Adc Ports

Hello. I am intending to use a total of 19 servo's in my robot. 1 servo to sweep the Ultrasonic pic sensor, and the other 18 servo's for the legs and movement of the robot. Ive read in the tutorial for connecting the ping sensor, that I will need to hook it up to 2 I/O ports. But with 19 servo's connected on the board, I would only have 1 digital...
blog
Ez-Robot Supports The Brookstone Rover

Ez-Robot Supports The Brookstone Rover

Control the Brookstone Rover with EZ-Builder and EZ-B over WiFi-wheel encoders, built-in camera, speech, Wiimote, joystick and scripting for...
question
Hello All!

Hello All!

My name is Louis, i just bought my very own EZ-Robot kit and im very excited to get it. Since i was little i have always dreamed of having the Johnny 5 robot featuring in an old film (what's the name...
question
Custom Charging Application Issue

Custom Charging Application Issue

Hello all, May i introduce myself, i am Garrett and am constructing a robot for a class project. I have run into an issue in charging my robot and have...
question

Ebay Wall-E Prices

So, is DJ's hack of Wall-E the reason that the U Command Wall-Es have skyrocketed in price on e-bay recently? Are we, DJ wantabes, just bidding against each other? But seriously, I think the prices have gone so high lately that scratch building Wall-Es body is within reason. My only concern is how to build his tracks. Does anyone have any good...