This project has evolved some , the basic rundown is I'm modding two Omnibots , one a regular the other a larger 2000 model. I will have two ezb kits , rad base idea was thrown out because of so much noise but could go back on the table if the omnibot drivetrain is too weak to pull it.
By jstarne1
— Last update
Discover more robots
Ezang's My Tracking Bot For You To View
Bot will find you, you can't hide anywhere, lol
Kenny's Motion Activated Camera Pause Toggle
Synthiam ARC toggles camera recording with CameraRecordPauseOn/Off using motion-tracking scripts to auto-start and pause...
Ezang's Mymodifiedadventurebot
Modified Adventure Bot with ultrasonic radar, camera, RGB animator and custom back wheels






Hey Troy , the gears Robotmaker was suggesting I upgrade is the huge 5 to 1 gear on the shoulder which delrin came with the kit free , it's 35 extra each for the metal replacement gear. The little delrin.gears you sent are perfect! Speaking of the gears , the motors robotmaker sent me have brass pinions heat set on. All I can think of to protect the motor is to carefully cut this gear off the shaft.
Have you tried heating and prying? The gear itself I mean.
you need a pinion puller kit very cheap on ebay,wont damage the motor by prying
pinion puller kit
this is a must have for building robots $20 usa seller
That's a good point. Cheap enough to have handy for other projects.
Meh, IM pretty awesome with a dremel so I will cut them off so I can get this gearbox modified now =) I'll post before and after soon as I cut it off.
LOL Tim the Toolman!
Good news , the yusa 12v batteries are going to Jarvis jr vacuum omnibot. I know power sonic batteries are always underrated for their size and model. For example the 12v 7ah 6 pound battery is actually guaranteed to be 12v 9ah and still weight 6 pounds. If you had a total of 4 of these batteries it is like having 5 yusa comparable batteries. 4x 9ah =36 ah of available power.
Oh 4 of those batteries shipped are 87 dollars by the way , but I do want long run times.