It's just a concept right now but I wanted others to see that the scale doesnt quite match. Right now its just stacked on there and neck is a little too long.
By Troy
— Last update
Discover more robots
Orwnic82's Ez-B Processor Quadrotor
Control a DIY quadrotor with Visual Studio apps: blade/angle monitoring, individual motor control, tilt monitoring and...
Cochranrobotics's Inmoov - D.Cochran Style
InMoov 'Spock' rebuild using LattePanda, dual EZ-B controllers, Omron HVC-P vision, MXL mic, Flexy hands, BEC power...
Laurin's My Head Designed For Jd
JD head redesigned to add ultrasound sensor and gyroscope space; hip gait refined for a more humanlike walk. Thingiverse...
I found the stock motors are 3 volt mabuchi RE-140 dc brushed motors. I bought a couple to repair my left claw because the motors were badly corroded and locked up. On eBay many auctions just call them 3 -6v dc hobby motors.
the RK-370CC has more then double the torque of the SA-260 and same size also only problem it runs at 12 volts
also FC-260SA is shorter the SA-260 with double the TORQUE and 3 volts to 6 volts
12v isnt a problem. I will run 12VDC motors on it anways.
Yea that's the great.thing about own , use 12v for more torque and own to control power / speed
Im still waiting on my fuse block to arrive. I will use mini blade fuses and also use the drawer as the battery/fuse box.
Ash , I'm using round glass fuses , its easier to tell when they blow / and test , I think my block from radioshack is 30 amp per fuse and 6 fuse lanes.
I found the fuse box at a good price and now is on its way. www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=17138
Cool! Mine has 6 as well. There was a version that had a tiny led showing power running through it but I figured it was a waste of power since I could tell right away which was blown by what wasnt working.