It's just a concept right now but I wanted others to see that the scale doesnt quite match. Right now its just stacked on there and neck is a little too long.
By Troy
— Last update
Discover more robots
DJ's Trs-80 Model 100 Controlled Wall-E
Control an EZ-Robot Wall-e from a hacked 1983 TRS-80 via TTL Bluetooth; load BASIC programs over Bluetooth; EZ-SDK...
Gwen4156's The G-Bot (Gwen's B9 Robot Project) Gets His...
G-Bot outdoor test: handling lag and ramping issues, tips to use wireless controller and prevent tread snags, successful...
Robot's First Attempt Building An Android App For The Irobot...
Upgraded Dirt Dog speakers to 8 ohm 2W 1in and hidden inside the dust bin, gaining extra space after removing the vacuum...
I found the stock motors are 3 volt mabuchi RE-140 dc brushed motors. I bought a couple to repair my left claw because the motors were badly corroded and locked up. On eBay many auctions just call them 3 -6v dc hobby motors.
the RK-370CC has more then double the torque of the SA-260 and same size also only problem it runs at 12 volts
also FC-260SA is shorter the SA-260 with double the TORQUE and 3 volts to 6 volts
12v isnt a problem. I will run 12VDC motors on it anways.
Yea that's the great.thing about own , use 12v for more torque and own to control power / speed
Im still waiting on my fuse block to arrive. I will use mini blade fuses and also use the drawer as the battery/fuse box.
Ash , I'm using round glass fuses , its easier to tell when they blow / and test , I think my block from radioshack is 30 amp per fuse and 6 fuse lanes.
I found the fuse box at a good price and now is on its way. www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=17138
Cool! Mine has 6 as well. There was a version that had a tiny led showing power running through it but I figured it was a waste of power since I could tell right away which was blown by what wasnt working.