This is a test, hard to balance Mr. ConeHead dancing
Take 2 soon :-)
By EzAng
— Last update
Discover more robots
DJ's Robophilo
Upgrade RoboPhilo Junior with EZ-Robot EZ-B and camera for WiiMote accelerometer control, vision tracking and...
Rb550f's Ez Robot Attacknid 6Lr
Attacknid robot with EZB V3: 18-inch walker with 12V lithium, dual H-bridge drive, sound/LED mic, 12-inch LED fan, under...
JT's Jts Robie Sr.
Restoring a Robie SR for EZ-B-ification: raising height ~6 in, adding a turning/tilting neck, new paint, learning...
These experiments bring a smile to my face! Freestyle robotics is where it's at
If you truly want to get some bipedal walking motion happening you need an ankle joint, but I'm guessing you've already arrived at that conclusion
Yes, which servos for that?
look at your jd robot.foot D17/18 and D13/14
Thanks Nomad! I was going to suggest the same thing:
https://synthiam.com/Shop/AccessoriesDetails.aspx?prevCat=104&productNumber=1210 https://synthiam.com/Shop/AccessoriesDetails.aspx?prevCat=104&productNumber=1211
You might be able to get away with a DIY solution but the JD ankle/feet gives you the general concept.
ok I will look at that, thanks