cE9s4PsOgeBQIORwjd5!~~60_1-634818020230156250.jpg)
BO)Lupuc4g~~60_35-634706297915000000.jpg)
LupbT6!~~60_35-634706298769375000.jpg)
C5j!~~60_35-634655044863125000.jpg)
C5j!~~60_35-634659603510781250.jpg)
C5j!~~60_35-634651704046230469.jpg)
This project has evolved some , the basic rundown is I'm modding two Omnibots , one a regular the other a larger 2000 model. I will have two ezb kits , rad base idea was thrown out because of so much noise but could go back on the table if the omnibot drivetrain is too weak to pull it.
By jstarne1
— Last update
Discover more robots
Jstarne1's Ladybug Lawn Mower 3D Designing The First 3D...
Ladybug-themed all-in-one mower and weed eater kit showcasing an integrated lawn mower and trimmer design.
Hexxen's Zeus - A Monowheel Robot (Work In Progress)
Balance a two-propeller robot and configure Xbox 360 joystick analog buttons, featuring setup photos.
David's Home Depot R2D2 To A Real R2D2 Robot
Convert a Home Depot animated R2D2 into a mobile robot: battery-powered dome, AR-activated lights/sounds, bumper-car...
Video update- Jarvis neck moves for the first time.
https://www.youtube.com/watch?v=XYqal8AuqfA&feature=youtube_gdata_player
Good work, Josh!
Looks sweet!
I only had 2 of the three servos powered up so one sorta tilted to the side. I must test the arms soon and I will use the same servo signal generator. Holding position the robots servos had a very light buzzing noise that's barely audible.
Ok I.threw out the old gearbox and coming up with something more suitable. Any ideas? Post links of ideas. Take in mind the robot weights 50 to 60 pounds at max with 5 batteries. I'm considering high torque continuous rotation servos , either two servos , one driving right one driving left or perhaps 4 continuous servos... Hmm
Hmmmm.... What was the problem?
When I did the 180 turn on the bottom of the base the gearbox is too long to fit, so now I'm looking at servos or motors to use.
Have you checked into servocitys geared motor solutions?