Inverted Pendulum — Balancing controller for Sainsmart v3 (and compatible) robots: PID tuning, real‑time telemetry, angle offset, movement and calibration via ARC. Try it →

Mulberry

USA

Asked May 2015 — Edited May 2015

Resolved by Jeremie!

2 Participants

Ez Servos And Voltage

ARC Skip to comments Jump to end

Hola

Hopefully this is easy. Can the standard EZ servos (builders kit) safely run at 5 volts (but plenty of amps)?

Thanks,

Scott

Jump to end

Upgrade to ARC Pro

ARC Pro will give you immediate updates and new features needed to unleash your robot's potential!

Compare Pro Features View Subscription Plans

Jeremie

PRO

Canada

#1 May 2015

Yep over 4.8V is fine.

DJ Sures

PRO

Synthiam

#2 May 2015

And you'll find the specifications for the servo on all product pages that use the servos. Here's a direct link to the product that you're inquiring about. Scroll down and you will find the servo specifications: https://synthiam.com/Shop/AccessoriesDetails.aspx?prevCat=101&productNumber=2

Mulberry

USA

#3 May 2015

Thanks :-)

Scott