Ad Second Rgb

Question

hi is it possible to use 3 rgb animator in one projeckt.? also i would like to know how can i find the adres for the rgb.?  thank you

Nomad 6R · Answer

i found the adresses for 12c.its from 0x02 to 0x120 problem when i put in 0x02 and save it.it doesn stay saved.

Jeremie · Answer

Hi Nomad, I just confirmed with 3 different RGB eyes that the I2C address does save when you change it. You are likely encountering a mistake I made when I was first trying multiple RGB Eyes, when exiting the Settings window you must press the "Save" button, if you exit out of the window with the "X" in the upper right the I2C address will not save.

Nomad 6R · Answer

hi jeremie i did puch the save button.what am trying to do is use robi eyes whit rgb, connector.i read they are 3.3 volts .the eyes of robi has 6 black wires. but no info on boards.so i made a cable for rgb conector and try to lid , up the eye,it hard to see ,so low is the color,aldo its 3.3 volt. when i normal connect to white pin ezb ptp version,the eye lid up good. but then i have chort on ports. so the adres 0x02 is correct ?next adres is then 0x03 ? thank you

Jeremie · Answer

Oh sorry @Nomad If you are trying to use the RGB animator with another third party product it will not work, it has to be the EZ-Robot RGB eyes.

Nomad 6R · Answer

ah thats bummer.are these adresses correct ? so the adres 0x02 is correct ?next adres is then 0x03 ?

Jeremie · Answer

The default address is 0xA0, and I believe there is an issue with odd addresses so the next one would be 0xA2.

Nomad 6R · Answer

ah many thanks for your help.is there another way to ad the eyes and mouth. they are ,i gess tri colored red/blue/green.

Nomad 6R · Answer

does the neon pixel bit works on rgb connektor ? neon pixel bit

Jeremie · Answer

Yes single RGB LEDs could work for each eye and a mouth if you have a tight form factor inside your robot's head, that's good idea.

Nomad 6R · Answer

i was just reading.does the bit have multiple colors?for the mout i have enouch, white ports.its the eyes . so adres rgb is 0xA2 so next is 0xA3 ?

Jeremie · Answer

The blaster bit has all the colors of the Rainbow. If you wanted to use 3 sets of EZ-Robot RGB Eyes, you could use 0xA0, 0xA2, 0xA4, etc

Nomad 6R · Answer

jeremie you teached me alot.thanks

Toyhackrobotics · Answer

@Jeremie,

Nomad 6R

Upgrade to ARC Pro