Lazy much? Blind control to major tom... I can now control the blind/shades on my deck from my phone! With a little bit of hot glue, a couple wood screws and some pieces of 2x4 ends I had lying around.
By DJ Sures
— Last update
Discover more robots
Steve's Resistance Is Futile 7 Of 9 Borg From Star Trek, My...
Borg-inspired 7 Star Trek robot with fiberglass body, moving DIY eye, green-tinted plasma disc, EZ Robot camera, lotiny...
Lizpoir's Omnibot 200 In Germany
Showcase Omnibot 2000 robot - owner's reveal and demonstration.
Thetechguru's Long Lasting Roli
Extend Roli's runtime for NMS experiments with a 7200mAh internal battery installed after a precise Dremel mod, boosting...
Came in late on this one
Haha - no prob
i read UB places some safety stuff in the robot.but that is not the only problem. if you make poses and you get an update ,your poses are gone. i had bouth a alpha2 on indiego,but now i cant get on there server, means i have a useless robot.
great text about the batteries
i just saw the video again end it solved a problem i had some time ago.i got a message in ARC saying your main project is not set ,(mobile ). i just saw you can set it in the cloud save under ezbv4 is main control for mobile.
in post #6 alan speaks off a batt Lead Acid gel cells .do they excist for 7.4 volts? and its only for an ezbv4 whit cam,nothing els.also would it be save to use the , ezbv4 for lets say 12 to 18 houres on power?
Typically 6v or 12v. EZ-B with just camera could use either. You only need 7.4 if using servos.
How long it will run depends on the amp-hours the battery stores vs the amps drawn by the EZ-B and camera (which is not much).
Alan
hi alan
i found this batt. what do you think.
batterie 6 volt
and this charger
charger
Those look fine. It will take about 6 hours to fully charge the battery, but with 12 amp hours that battery should last a long time between charges. The EZ-B and camera draws just 180ma, so it will run for a couple of days between charges if I am doing the math right.
You will need to set the low voltage alert to lower voltage or disable it so the EZ-B does not complain.
Alan
alan thank you.now i have something to go on.set volt to 6 volt on the web page