Lazy much? Blind control to major tom... I can now control the blind/shades on my deck from my phone! With a little bit of hot glue, a couple wood screws and some pieces of 2x4 ends I had lying around.
By DJ Sures
— Last update
Discover more robots
Jstarne1's Meet Rc-Xd Airsoft Droid Dual Wield Gunner...
RC-xd Airsoft Droid: modified Omnibot on a rad 2.0 base with dual automatic airsoft guns and EZ Cam for Mech Wars, built...
Donesvarc's Wall-E From Czech Republic
Build a custom WallE robot with parts list, servo mods, wiring tips, cameras, sensors, LEDs, audio and power solutions...
DJ's Master Blaster Robot
Remote-controlled 1980s-style animatronic robot with servos for arms/head and wheeled mobility, controlled via Synthiam...
Came in late on this one
Haha - no prob
i read UB places some safety stuff in the robot.but that is not the only problem. if you make poses and you get an update ,your poses are gone. i had bouth a alpha2 on indiego,but now i cant get on there server, means i have a useless robot.
great text about the batteries
i just saw the video again end it solved a problem i had some time ago.i got a message in ARC saying your main project is not set ,(mobile ). i just saw you can set it in the cloud save under ezbv4 is main control for mobile.
in post #6 alan speaks off a batt Lead Acid gel cells .do they excist for 7.4 volts? and its only for an ezbv4 whit cam,nothing els.also would it be save to use the , ezbv4 for lets say 12 to 18 houres on power?
Typically 6v or 12v. EZ-B with just camera could use either. You only need 7.4 if using servos.
How long it will run depends on the amp-hours the battery stores vs the amps drawn by the EZ-B and camera (which is not much).
Alan
hi alan
i found this batt. what do you think.
batterie 6 volt
and this charger
charger
Those look fine. It will take about 6 hours to fully charge the battery, but with 12 amp hours that battery should last a long time between charges. The EZ-B and camera draws just 180ma, so it will run for a couple of days between charges if I am doing the math right.
You will need to set the low voltage alert to lower voltage or disable it so the EZ-B does not complain.
Alan
alan thank you.now i have something to go on.set volt to 6 volt on the web page