This Wall-E
www.instructables.com/id/Build-an-autonomous-Wall-E-Robot/
Has lots of servos and parts, but the links are not working, anyone have alternate links?
Robotagz
USA
Asked
— Edited
Voice Activity Detection
— Real-time microphone VAD using FFT to detect speech start/end and trigger scripts, with live level graph and sensitivity tuning
Try it →
@Robotagz Thanks for posting. This link works for me. see snip
Frank
@Robotagz As I read your post more closely I can see that that you were talking about the internal parts links, not the main article
I found this link on the same site where a person claims to have used the EZB developer kit for the parts source
Wall-e with EZB parts
Regards, Frank
All you need is the EZ-B v4/2 Developer Kit
It has the correct number of servos for arms, and head. And continuous rotation servos needed for the tracks. The camera and EZ-B fit with the battery holder as well.
Although, i highly recommend upgrading to a LiPo Robot Battery 7.4v 1300mAh. Which also will need a LiPo Battery Balancer Charger and LiPo Battery Harness
Here's my build: https://synthiam.com/Robots/The-Real-Wall-E
thanks a lot guys!