Robot Building Community
Share robot projects, ask ARC programming questions and learn from other builders. Browse tutorials, Robot Skills, example programs and community discussions.
Drive Real Robots, Anywhere
Remotely operate robots around the world or add live telepresence to your own build — straight from your browser.
Discover Exosphere
"I build robots" Hoodie
Autonomous AI
Autonomous AI robot skill with vision, speech, movement, animations, and self-directed task...
Azure Text To Speech
Azure Text-to-Speech for ARC: generate natural-sounding robot speech with Microsoft Azure voices,...
Exosphere
Telepresence and remote control for any robot with human-assisted tasks, video, audio, and AI...
Azure Speech Synthes…
Microsoft Azure neural text-to-speech for ARCx scripts and skills, with multilingual voices, SSML...
Rtk Gps
RTK GPS rover/base skill with NTRIP corrections, cm-level pose, heading support, map fusion, and NMS...
Outdoor Navigator
GPS-driven outdoor robot navigation with satellite maps, saved waypoints, zones, no-go areas,...
ESP32/Arduino EZB firmware with MPU6050 support: provides accelerometer angles and Yaw/Pitch/Roll gimbal servo values for stabilization and scripting
Ezang's Mr. Conehead Monster
Mr. ConeHead Monster robot: 6 servos, 2 grippers, custom rear wheels and camera to see you - DIY fun by Angelo
5
3 k
Robohappy's Adventurebot4wd
4-wheel drive robot upgrade using four CR servos with Y-splitter cables to preserve directional control; camera, sensors and more planned
4
5 k
Inmoov With Ezb
I have purchased 2 ezb’s and was wondering two things. Where Can I mount them. And how do I connect both at once so the ARCs can move in synchronization.
64
12 k
Animator28's AVA (Advanced Visual Android)
Human-sized open-source 3D-printed humanoid robot AVA with free Thingiverse files, built on the EZB platform, seeking coding guidance.
7
3 k
How To Cut The Port Power After Completed The Action
Hi, I have a problem about the servo, it is easy to burn out after completed the command. It is because the last...
16
5 k
Mastersailor's Noisy Boi (Trademark Pending)
Sub-10 ft remote network robot: 47 mph, plow, flamethrower, remote start, trailer hookup, walks dogs, sentry mode with siren,...
3
3 k
Power Glove Live Hack....Now We're Playing With Power!
Control robots with a Power Glove using EZ-Builder, finger sensors and accelerometer drive robot movements; join...
0
2 k
Maxsonar
Hi All. I'm thinking of using a Maxsonar sensor for collision avoidance. I don't want to mount it on a servo for aesthetic reasons (will it make a big difference if I do this?). Will one sensor be good enough? Is it even possible for the software to manage 2 or more sensors? Also, there appear to be many different models / types of Maxsonar...
8
4 k
EZ-B V4/2 Too Slow In Wifi Client Mode
Hello, I've successfully connected to my EZ-B in Ad Hoc WiFi mode and configured it to connect to my home WiFi network. It boots up and tells me it's connected and has a green flashing light. In the ARC app, I can scan and see it's address (192.168.1.63 in my case). When I try to connect to it, in ARC, the connection fails due to the operation...
4
2 k
Wireless Power Glove Live Hack! The Final Round....Fight!
Convert a vintage Power Glove into a wireless gamepad to control robots, hardware and software ready with...
5
2 k
Raspberry Pi Or Arduino
I am building a humanoid robot and was wondering which is better to use? I am starting on the head from a book that I received on the Mark 1 robot project. I am then going to research and build humanoid or at least close to humanoid legs. Do anyone have any projects I can research and learn about biped robots. The Mark 1 can not walk yet from...
2
3 k
Custom Hexapod Build
Can I use the EZ-B v4 and the ARC to make my own custom Hexapod with leg lengths that differ from the EZ-Robot six hexapod kit ?. Will the ARC be able to calculate inverse kinematics for my custom hexapod ?
1
3 k