ESP32_MPU6050 icon ESP32_MPU6050 — ESP32/Arduino EZB firmware with MPU6050 support: provides accelerometer angles and Yaw/Pitch/Roll gimbal servo values for stabilization and scripting Try it →

Robot Programming Questions and ARC Help

Get help with ARC scripts, Robot Skills, hardware connections and robot behavior. Browse questions and answers from the Synthiam community.

ARC Pro
Learn More
Upgrade to ARC Pro
Elevate your robot's capabilities to the next level with Synthiam ARC Pro, unlocking a world of possibilities in robot programming.
Power Up Your Scripts with AI
Describe what you want — get working robot code. The project-aware AI Script Assistant built into ARC.
Synthiam Credit
Log In
Earn synthiam credit to lower synthiam product costs
Earn Free Credit
Share your robots, answer questions, and help others — earn credit toward ARC Pro, AI credits, and robot swag.
Remote control robots or add telepresence capabilities with Exosphere

Drive Real Robots, Anywhere

Remotely operate robots around the world or add live telepresence to your own build — straight from your browser.

Discover Exosphere
OpenAI Text To Speech by OpenAI
Featured
Openai Text To Speech

Convert text to dynamic, real-time speech with nine expressive OpenAI voices-natural, varied, accessible robot communication.

Community

Join the Synthiam Robotics Community

Connect with thousands of robot builders, educators, and engineers. Share projects, get answers, and learn to build smarter robots with ARC.

  • ✓ Showcase your robots & projects
  • ✓ Get help from experienced builders
  • ✓ Earn credit toward Synthiam products
Create Your Free Account Log In
question

Arduino Joystick

www.elechouse.com/elechouse/index.php?main_page=product_info&cPath=&products_id=313 Would this be configureable to the ez-b? just a question, have no intentions of buying.
question

Analog Motor Speed With Joystick ?

Hello,   I do not know if the subject has already been treated. I buy a 2X5 sabertooth I configure like this: https://synthiam.com/Tutorials/Help.aspx?id=173 I control my motors with a joystick gamepad with the joystick panel, it works. The problem is that it is all or nothing: the motors run in full speed or not run. I will wish that I push the...
question

Ez-B Failure Solution Found

It appears that mischarged batteries were playing with the ez-b. 4 batteries were almost fully discharged while 2 others were 3 quarters full. this caused some sort of ez-b burn out that make servos go berserk. So anyone who suffers from this sort of problem, its your batteries. double check when using the battery pack that comes with the ez-b.
question
Receive Audio From Robot

Receive Audio From Robot

Hello, I was using the robot the other day to interact with my friend on the first floor of my house while I was on the second floor. He could hear the robot through the...
question

Multichannel For Voice Commands With ARC

I am looking to use ARC voice commands within the house . However, I an not sure how to make ARC monitor multiple microphones/channels or what audio system needed to facilitate my request from any room . Any ideas ?
question
Sabertooth To Ez-B

Sabertooth To Ez-B

i made a diagram. is this the way to connect the ez-b to the sabertooth? Feel free to edit the pic and repost it.
question
Importing Scripts And Controls In ARC

Importing Scripts And Controls In ARC

It was mentioned earlier so here it is, the tutorial for importing scripts and controls in to ARC project. It is assumed you have already...
question
Cost Of 3D Printing ?

Cost Of 3D Printing ?

Just wondering about what the cost will be to have parts printed I found a motor i wish to mess around with dont have the link to the 3D plans for the motor yet but i do have a...
question

Relay Module

Hello is an easy way to Kinect Relay Module to EZ-B
question
Some More Exciting Stuff Happening At Ez-Robot

Some More Exciting Stuff Happening At Ez-Robot

Watch for some more exciting news next week ... [hint: you might be seeing some new faces on the office webcam]. Shhhhhh ......
question
Tutorials Kinda Vague?

Tutorials Kinda Vague?

The ez boxbot instructions seem to end at step 11 with the servo panel. Where are the rest of the tutorials?
question
The Revolution Has Begun!

The Revolution Has Begun!

Hey All, I scooted (1 1/2hour drive) to the EZ-Robot open house tonight. The new digs look awesome! DJ has done well! So the Revolution has begun! As DJ stated in the...